How to enjoy unlimited browsing free with etisalat on both android and PC

UPDATED * As at July 19th 2015.
To enjoy this you have to follow up with the latest information. 
=> Load your Etisalat SIM with N150
=> Subscribe for etisalat weekly Smartpak by dialing *343*5*6#
Note : it will last you longer than 2 weeks, thereafter scroll down to get the full settings. 
Am sure upon reading the headline unlimited FREE 
some of you would have jumped up with full excitement in your heart, well you read well thou ,and i know we all understand that limited tweaks on etisalat is mostly hard to come by not least unlimited browsing on same network, which in turn means what you are about to read as every probability of getting BLOCKED sooner than expected.
Buh then, having said this there’s no crime in trying and enjoy it while it works. For some days now etisalat seems to have been browsing freely on Android likewise on PC,  at first i personally didn’t believed it, not until a friend actually confirmed it works for a friend of his, thus he requested for the settings so i thought i should share for all.
Without wasting much of your time nor bore you with words, lets quickly go straight to how you too can be a part of this.
Mind you you’ll be needing a particular VPN called PSIPHON HANDLER for Android: Download HERE *
Setting it up*
Configure your etisalat Access point thus:
apn: etisalat
leave ip and port empty
Now configure PSIPHON thus:
If you have the application, launch it or download above
*Tick remove port
*Proxy type select : real host
*Proxy server: mobile.facebook.com
===*Click save.
*Go to option and select any region of your choice
*tick tunnel whole device.
*Click more option and also tick “connect through http”  still on more option tick “use the following setting”
*host adress: 185.28.193.95
*port:8080
close and connect and you are good to go.
*****For PC Simple server Settings
Connect your modem using the etisalat default settings with no ip address and port or simply input 127.0.0.1 as IP and 8080 as port,  you can also share Hotspot via your phone to your pc.
Download the required application needed for pc HERE  called SS and Configure Your SS,  the file is in zip format, extract and send simple server to desktop, Open Simpleserver.ini  and set or edit the following parameters
LHOST = ‘127.0.0.1’
IMETHOD = 0
ISPLIT = 0
RHTTP = 0
TIMEOUT = 60
PHOST = ‘185.28.193.95’
RQUERY = ”
RPATH = 0
PTYPE = 0
KEEP = ”
BQUERY = ”
MQUERY = ”
RHTTPS = 1
PPORT = 8080
LPORT = 8080
VALHDR0 = ‘mobile.facebook.com’
VALHDR1 = ”
VALHDR2 = ”
VALHDR3 = ”
IQUERY = ‘mobile.facebook.com’
ADMODE = 0
CQUERY = ”
CUSHDR2 = ”
CUSHDR3 = ”
CUSHDR0 = ‘Host’
CUSHDR1 = ”
ILINE = 0
FQUERY = ”
SBUFF = 1024
RPORT = 0
Run the SimpleServer.exe  and configure your browser to manual Proxy 127.0.0.1 Port 8080
*.Tick “Use proxy server for all protocols” if you want it to open all secured sites.
Enjoy while it lasts!!.

About the author

GeeksNG

9 Comments

  • Hi bro,
    It's a nice share thanks. But, my question is, hw can I make this psiphon handler work with utorrent? Both on android and PC, but especially on PC. How do configure utorrent to downld over VPN. Thanks

  • I don't think you need any configuration or so, since we actually ain't tunnelling via any IP, so it shd work.. Try allowing your utorrent connect to system settings

  • Kindly make use of simple server as posted above or better still if u insist on psiphone on pc, u still need simple server in order to power ur pc psiphone app, download it and configure by input 127.0.0.1 as stream ip and 8080 as port, den once ur simple server is connected, launch d psiphone and wait for it to connect. Set ur browser thereafter to auto detect proxy or no proxy.

  • Kindly make use of simple server as posted above or better still if u insist on psiphone on pc, u still need simple server in order to power ur pc psiphone app, download it and configure by input 127.0.0.1 as stream ip and 8080 as port, den once ur simple server is connected, launch d psiphone and wait for it to connect. Set ur browser thereafter to auto detect proxy or no proxy.

Leave a Comment