How to root Infinix Note 3 and Note 3 Pro withing secs

Someone decided to trill us with how to root infinix note 3, note 3 pro on Nairaland, so we thought sharing with you guys out there would be the best, although he claims the guide may be use to root any infinix phone but that remains unconfirmed

You would agree with me that most infinix devices running on Android 6.0 Marshmallow might prove a bit difficult to deal with, recalled how hard it was to change hot s or even hot 4 pro imei without having to root, not until we came up with an article to solve that.

Before we proceed to the guide on how to root infinix note 3 pro, you might have to take note of one or two things, as a matter of fact they are very key to the success of this tutorial

Requirements to root infinix phones

  • The first and most important thing you need is a PC with Mediatek Vcom Drivers properly installed
  • Secondly, you need SP Flash Tool installed on your pc, Check here for how to use
  • The next thing to consider is a good USB cable, preferable follow come
  • You Note 3 or Pro must have Touch Custom Recovery installed
  • Infinix X601 (Switched OFF)
  • The last thing here is kinda funny but true, you may also need a working brain as well, the guy who came up with this write up is as funny as anything… well you need a solid brain
  • And lastly, you need patient

Disclaimer; this site and its developers will not be held responsible if you should brick your device in the process of flashing this ROM, we however advice you follow strictly the steps stated below only if you conversant with flashing of custom ROMs using SP flash tool before you proceed, better still get someone who does!!!

How to install Custom Recovery on Infinix Note 3 and Note 3 Pro

  • Download the Recovery zip from here to your PC (not mobile)
  • Thereafter you need to extract the zip into a new folder ( Both the scatter and the recovery image should be in the same folder )
  • Launch SP Flash Tool and load the scatter from the folder where you extracted the zip, See here
  • Once the scatter files has been loaded, click on Download option on the flash tool

how to flash custom rom with sp flash tool how to install custom rom with sp flash tool

  • Now switch off your Infinix Note 3 or pro
  • Connect the switched off phone to the PC with the usb cable for the flashing process to begin
  • NOTE : you should see a red progress bar, followed by a yellow one and finally a tick appears to show that the recovery has been flashed successfully

flash custom rom with sp flash tool

  • You may now unplug the cable from your phone
  • After which you need to confirm the recovery has been flashed successfully by Press Volume Up + Power key to boot into recovery

All things being equal, it should boot into recovery, if so then Congrats, You now have a working custom recovery and now you may proceed to the next stage to root your infinxi X601

How to root Infinix Note 3, Note 3 Pro withing secs

  • Download Supersu zip here
  • Move it to the root of your sdcard. (by root of SD card, we meant in no folder at all)
  • boot your note 3 into CTR recovery

How to root Infinix Note 3 pro

  • Go to >> Install Zip >> Choose zip from Sdcard >> now locate Supersu and confirm to flash it
  • Once flashed successfully, Reboot your device, The device will then boot normally and you will find SuperSU in your apps list

how to root infinix note 3

PS : DO NOT interfere with the device in any way when it is rebooting even if you find like it’s boot looping – This is because the boot image is patched for rooting to be successful, You may download root checker from Playstore to confirm.

Should you brick your phone in the process, do not panic, refer here to download infinix note stock rom

Help Your Friends See this Post by sharing this article..😊..
Find Games/Phone & Post

About the author


Leave a Comment